Powered by Amazon WebStore, an Amazon Services ProductVisit Amazon.com
 

Search
Go

Shop by category
 
 
Admiral Dryer Blower Wheel 31001043
Email a friendView larger image

Admiral Dryer Blower Wheel 31001043

Our Price: $31.95
SKU:

Admiral Blower Wheel 31001043

In Stock
Usually ships in 1-2 business days
Product Details:
Package Length: 8.0 inches
Package Width: 8.0 inches
Package Height: 3.0 inches
Package Weight: 1.0 pounds
Average Customer Rating: based on 15 reviews
Customer Reviews:
Average Customer Review: 4.5 ( 15 customer reviews )
Write an online review and share your thoughts with other customers.


Most Helpful Customer Reviews

1 of 1 found the following review helpful:

5Just what I needed.Mar 26, 2012
By Fire Hazard
My Maytag Performa dryer was making a lot of noise from the front under the drum. After disassembling the dryer I found that the blower wheel had come loose, freely rotating around the shaft and was rubbing against casing. The flat edge had worn down to the point where I needed a new wheel. After looking at parts websites I found what I needed. The same model number was twice the price on the cheapest other website I found. The only reason I would advise finding your model number on another website is that most of the blower wheels don't have all the dimensions on Amazon. The dimension that was missing on this item was the 'flat side' dimension (this particular item has a 1/2" shaft with the flat side being 7/16") This is a very important dimension for replacing it.
This replacement was very easy.

Lift the top of the dryer.
Remove the screws holding on the front of the dryer
Remove the screws covering the blower (on the bottom right)
Take the External Retaining Ring off of the shaft
Pull the blower wheel off
Tap on the new blower wheel
Then reverse the steps to reassemble.

Make sure the dryer is unplugged and you are careful while tapping on the new wheel.

1 of 1 found the following review helpful:

5Maytag Dryer Blower WheelOct 12, 2010
By Dennis
Excellent quality at a fraction of retail cost. Make sure you TAP it on the shaft evenly. I used a deep well socket. If you haven't done this before, be aware that there is a O.D. snap ring on the shaft.

1 of 1 found the following review helpful:

4Great Price PointJun 16, 2014
By Starkist89
This blower fan fit my dryer perfectly, and the price was ridiculously low. The low price did require me to make some slight modifications with my rotary tool. There were some plastic bits that got in the way. It was easy for me to correct.

3Admiral Dryer Blower Wheel 31001043 ...May 02, 2014
By Clint
The blower wheel was at a good price. The problem that I had was that the hub was too long and I couldn't get the snap ring back on. It was a press fit and I couldn't get the wheel back off. I had to trim the hub with a razor blade to get the snap ring back on. If you get one measure the hub length and see if it will go between the 2 snap rings before you put it on.

5Right Product at the Right Time and the Right PriceOct 02, 2013
By Raymond Cook
I am very happy with the product.
It quieted things down and is working great.
This was Original Equipment for the Dryer which works great.

See all 15 customer reviews on Amazon.com
About Us   Contact Us
Privacy Policy
Web business powered by Amazon WebStore
Web business powered by Amazon WebStore